Kumo 16 Blade R4 PA C23 Documentation

Documentation Spreadsheet: R4-PA-C23 rack layout and networking VLAN 3040

This network is shared with Engage1, see also Engage1 Network Documentation

For this deployment, server addresses should all be in the range 10.10.10.{200-254}

  • Mangement Switch (Cisco Catalyst 3650)
  • 10G TOR Switch (Cisco Nexus 3548)

For servers, we have used addresses starting from

  • Supermicro 1 Emergency Box
  • Supermicro 2 Services Box
  • Dell R720 Storage Server
  • Dell M1000e CMC
  • 10.10.10.{211-226} IDRAC for Dell Blades 1-16

Cisco Nexus 3548 Switch

  • username/password: see bitwarden Cisco Nexus 3548 Switch

Cisco Catalyst 3650 Switch

  • username/ssh-telnet password: see bitwarden Cisco Catalyst 3650 Switch

The enable password is what you enter after you log in and type ‘enable’.

If the switch is reset to defaults, you must enable aaa-newmodel for SSH to work:

switch# config t
switch(config)# aaa new-model 

Dell M1000e Chassis

Command to reset something to default (source):

    racadm racresetcfg [-m ] where module is [ chassis, kvm, server-n where n= 1 - 16]